Richelieu 246016SSPVC - Zenitude - Decorative Visible Rail System in Stainless Steel | Mod Accents
Up to 25% Select Products | USE CODE: WINTER

Zenitude - Decorative Visible Rail System in Stainless Steel

Zenitude - Decorative Visible Rail System in Stainless Steel
Richelieu | Authorized Reseller | Model # 246016SSPVC
$735.80
 Add To Cart
Make an offer Price Alert Compare Compare Products
Free shipping over $75
Seen it for less? Call for best price.
Complete steel hardware kit with 78 in (2 m) track set for the easy installation of a regular wood door weighing up to 220 lb (100 kg) each. The tracks are perforated at the ends so that they can be joined with a connector plate. Ideal for applications for extra wide doors and biparting applications. Available soft-close mechanism (sold separately) for doors weighing up to 176 lb (80 kg).IMPORTANT: The minimum door width is 36 in (914 mm) when using a soft-close mechanism, and the maximum door weight is 176 lb (80 kg).
  • Interior Barn Door
  • Ball-bearing rollers for smooth and quiet operation.Rails are pre-drilled at every 450 mm for the installation of 5 wall-mount brackets and at each end to allow for interconnection with other rails or the installation of soft-close mechanism.Security: each roller unit is equipped with a device that prevents derailment during rough use of the door.
  • 1 two-meter rail (flat bar)2 single roller supports for 1-3/8" or 1-3/4" door2 end-bumpers5 wall-mount brackets2 anti-derailment pieces1 door bottom guideScrews are included
  • Door handles and door not included. It is recommended to use a solid or glass door in order to obtain the minimum weight to reduce noise resonance. Use a wider door than the opening to avoid angled views and preserve privacy. For example, it is recommended to use a door 34" wide for an opening of 30". The bottom of the door requires a groove for the concealed guiding system. IMPORTANT: The minimum door width is 36 in (914 mm) when using a soft-close mechanism, and the maximum door weight is 176 lb (80 kg).Preparation: Remove the frame moldings or install a piece of wood (not included) of the same thickness and length before setting the new hardware in place to ensure there is enough clearance for the door. Always make sure that the product is properly attached or installed using appropriate fixings material. An additional anchor may be required for installation (sold separately).- Pictures provided for visual reference only: actual product may vary.- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation. - Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.- Never spray lubricant.
  • Interior access door.
  • By accessing or referring to this document, or by using any of Richelieu's websites, you accept all applicable terms as they apply from time to time. This legal disclaimer is in no way limited or altered by any other terms or conditions. Richelieu may change said terms at its discretion and without prior notice. A version of the most current terms will always be available on Richelieu's website. The preceding information and technical documentation, information, or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark, and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies. Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, or infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise. Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
  • Screw/Nail Included
  • Load Capacity-15 kg to 100 kg
  • Door Material-Wood
  • Door Position-In Front of Wall
  • Track type-Flat Bar
  • Track Mounting-Wall Mount
  • Roller Type-Ball Bearing
  • Roller Position-Upper
  • Door Thickness-1.38 in to 1.75 in
  • Door Width-24 in to 40 in
  • Groove Width at the Bottom of Door-0.28 in
  • Groove Depth-0.79 in
    • Length 78.74"
    Length Millimeters 2000

     Instructions 2

     Line Art

    Brand

    Richelieu

    Model #

    246016SSPVC

    Country of Origin

    Cn

    Finish

    Stainless Steel

    Materials

    Stainless Steel

    Style

    Rustic / Iron
    Richelieu logo

    About Richelieu

    Richelieu Hardware is a leading North American distributor and importer of specialty hardware and complementary products, serving a wide range of industries including kitchen and bathroom cabinet manufacturers, furniture makers, and interior designers. Founded in 1968 and headquartered in Montreal, Canada, Richelieu offers an extensive catalog of over 130,000 products, including decorative and functional hardware, lighting systems, kitchen accessories, sliding doors, and ergonomic solutions. The company has built a strong reputation for innovation and quality, continuously expanding its product lines to meet the evolving needs of professionals and DIY customers alike.

    With a strategic presence through distribution centers across Canada and the United States, Richelieu provides efficient service and product availability to a broad customer base. The company is also recognized for its strong focus on design trends, sustainability, and cutting-edge technology, often collaborating with international partners to bring the latest solutions to market. Its robust online platform and commitment to customer service have positioned Richelieu as a trusted partner in the hardware industry, helping businesses and individuals bring their projects to life with precision and style.
    Product Q&A 0
    Mod Accents

    Reviews

    We're here to help.

    How to contact us:

    1-855-306-5479
    support@modaccents.com


    Return Policy


    Shipping Info


    Contact Us

    Our Story
    Contact Us
    Get Help
    Stay Connected.
    Sign up for exclusive coupons & special offers.
    Sign Up
    Contact Info
    1-855-306-5479
    support@modaccents.com
    1985 Cedar Bridge Ave Suite 2a, Lakewood NJ, 08701
    Customer Reviews
    Customer Code: 

    © 2026 - Mod Accents